Hi,
I also facing the following issue with esp32, I tried to configure both STA and AP and same but Station is connecting but when I tried to connect with AP mode it is not connecting. I'm using Arduino IDE here is my code please help me
#include <WiFiClient.h>
#include <ESP32WebServer.h>
#include <WiFi.h>
#include <ESPmDNS.h>
const char* ssid = "TEST1234";
const char* password = "test1234";
const char* ssidAP = "TIMER_SWITCH";
const char* passwordAP = "timer_test";
ESP32WebServer server(80);
const int led = 13;
void handleRoot() {
digitalWrite(led, 1);
server.send(200, "text/plain", "hello from ESP32!");
digitalWrite(led, 0);
}
void handleNotFound(){
digitalWrite(led, 1);
String message = "File Not Found\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET)?"GET":"POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for (uint8_t i=0; i<server.args(); i++){
message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
}
server.send(404, "text/plain", message);
digitalWrite(led, 0);
}
void setup(void){
pinMode(led, OUTPUT);
digitalWrite(led, 0);
Serial.begin(115200);
WiFi.mode(WIFI_MODE_APSTA);
WiFi.begin(ssid, password,6);
WiFi.softAP(ssidAP, passwordAP,6);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
if (MDNS.begin("esp32")) {
Serial.println("MDNS responder started");
}
server.on("/", handleRoot);
server.on("/inline", [](){
server.send(200, "text/plain", "this works as well");
});
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}
void loop(void){
server.handleClient();
}
AP+STA. AP authentication Failed.
Who is online
Users browsing this forum: Bing [Bot], dzungpv, ESPBoards, Google [Bot], MicroController, ok-home and 118 guests