Flash through host and Esptool

Post Reply
bendaa
Posts: 1
Joined: Thu Apr 20, 2017 8:12 am

Re: Flash through host and Esptool

Postby bendaa » Thu Mar 22, 2018 8:07 am

Hi,

As I didn't see any further replies to this post I wonder did some someone got this accomplished.

The goal is to be able to flash the ESP32 via UART with a microcontroller.

Appreciate any help given.

Thanks
Top
adameng
Posts: 3
Joined: Tue Jul 02, 2019 1:58 pm

Re: Flash through host and Esptool

Postby adameng » Tue Jul 02, 2019 2:26 pm

hi

i am also looking for a solution. have anyone achieved it yet ?
Top
iklask
Posts: 4
Joined: Tue Jul 02, 2019 6:50 pm

Re: Flash through host and Esptool

Postby iklask » Tue Jul 02, 2019 9:16 pm

I've been working on something that could do this. Right now its a simple arduino sketch that can grab a bin from say an SD card and upload to an esp32 connected over UART. It kind of works but every so often I get an error code that doesn't exist on the Serial Protocol wiki :cry:. The 8266 seems to work fine
Top
adameng
Posts: 3
Joined: Tue Jul 02, 2019 1:58 pm

Re: Flash through host and Esptool

Postby adameng » Wed Jul 03, 2019 3:34 am

mind sharing or advising the cost of your code ?

info@adamengineering.co.za
Top
iklask
Posts: 4
Joined: Tue Jul 02, 2019 6:50 pm

Re: Flash through host and Esptool

Postby iklask » Wed Jul 10, 2019 1:50 am

adameng wrote: ↑
Wed Jul 03, 2019 3:34 am
 mind sharing or advising the cost of your code ?

info@adamengineering.co.za
I'll post with a github project when it's done. Still making sure it all works then need to clean up code.
Top
Post Reply

Return to “ESP-IDF”

Who is online

Users browsing this forum: No registered users and 142 guests