BLE Server, problems with custom advertisement and manufacturer data

[ruppie]

Hello,

I have prepared a Test BLE Server to rebuild a LEGO HUB, Test is for Advertising only
Examle code:

Code: [Select all] [Expand/Collapse]

1.  
2. *
3.     Based on Neil Kolban example for IDF: https://github.com/nkolban/esp32-snippets/blob/master/cpp_utils/tests/BLE%20Tests/SampleServer.cpp
4.     Ported to Arduino ESP32 by Evandro Copercini
5.     updates by chegewara
6. */
7. #include <Arduino.h>
8.  
9. #include <BLEDevice.h>
10. #include <BLEUtils.h>
11. #include <BLEServer.h>
12.  
13. // See the following for generating UUIDs:
14. // https://www.uuidgenerator.net/
15.  
16. #define SERVICE_UUID        "00001623-1212-EFDE-1623-785FEABCD123"
17. #define CHARACTERISTIC_UUID "00001624-1212-EFDE-1623-785FEABCD123"
18. BLEAdvertisementData oAdvertisementData = BLEAdvertisementData();
19. //BLEAdvertisementData oScanResponseData = BLEAdvertisementData();
20.  
21. const char advLEGO[] = {0x02,0x01,0x06,0x11,0x07,0x23,0xD1,0xBC,0xEA,0x5F,0x78,0x23,0x16,0xDE,0xEF,
22.                           0x12,0x12,0x23,0x16,0x00,0x00,0x09,0xFF,0x97,0x03,0x00,0x80,0x06,0x00,0x61,0x00};                    
23.  
24.  char  ManufacturerData[8] = {0x97,0x03,0x00,0x80,0x06,0x00,0x61,0x00};
25.  
26.  
27.  
28. void setup() {
29.  
30.  
31.   Serial.begin(115200);
32.   Serial.println("Starting BLE work!");
33.  
34.   BLEDevice::init("Long name works now");
35.   BLEServer *pServer = BLEDevice::createServer();
36.   BLEService *pService = pServer->createService(SERVICE_UUID);
37.   BLECharacteristic *pCharacteristic = pService->createCharacteristic(
38.                                          CHARACTERISTIC_UUID,
39.                                          BLECharacteristic::PROPERTY_READ |
40.                                          BLECharacteristic::PROPERTY_WRITE
41.                                        );
42.  
43.   pCharacteristic->setValue("Hello World says Neil");
44.   pService->start();
45.   // BLEAdvertising *pAdvertising = pServer->getAdvertising();  // this still is working for backward compatibility
46.   BLEAdvertising *pAdvertising = BLEDevice::getAdvertising();
47.   pAdvertising->addServiceUUID(SERVICE_UUID);
48.  
49.    pAdvertising->setScanResponse(true);
50.  
51.  
52. oAdvertisementData.setShortName("Lego Hub");
53. oAdvertisementData.setManufacturerData(ManufacturerData);
54. pAdvertising->setAdvertisementData(oAdvertisementData);
55.  
56.   pAdvertising->setMinPreferred(0x06);  // functions that help with iPhone connections issue
57.   pAdvertising->setMinPreferred(0x12);
58.  
59.   BLEDevice::startAdvertising();
60.   Serial.println("Characteristic defined! Now you can read it in your phone!");
61. }
62.  
63. void loop() {
64.   // put your main code here, to run repeatedly:
65.   delay(2000);
66. }

GeSHi © Codebox Plus Extension

Goal ist that scan and connect result from BLE Client is as follows like with original LEGO HUB:

Scanning ...<CR><LF>
[ADV 596] Packet received from 90:84:2B:4A:3A:0C<LF>
PAYLOAD 31 bytes<LF>
02-01-06-11-07-23-D1-BC-EA-5F-78-23-16-DE-EF-12-12-23-16-00-00-09-FF-97-03-00-80-06-00-41-00<CR><LF>
RSSI -29 dBm<LF>
ADV TYPE Connectable undirected<CR><LF>
128-Bit UUID #Ѽê_x#<SYN>Þï<DC2><DC2>#<SYN>00001623-1212-EFDE-1623-785FEABCD123<CR><LF>
LEGO BLE SERVICE UUID Found!<LF>
MAN SPEC DATA 97-03-00-80-06-00-41-00<CR><LF>
<CR><LF>
Connected<CR><LF>
Discovering LEGO HUB Service ... Found LEGO HUB Service <CR><LF>
Discovering characteristic ... Found LEGO Data Characteristic<CR><LF>



The result of my code from Above is like :


Scanning ...<CR><LF>
[ADV 655] Packet received from BC:DD:C2:CB:69:FA<LF>
PAYLOAD 14 bytes<LF>
09-08-4C-65-67-6F-20-48-75-62-03-FF-97-03<CR><LF>
RSSI -31 dBm<LF>
ADV TYPE Connectable undirected<CR><LF>
SHORT NAME Lego Hub<LF>
MAN SPEC DATA 97-03<CR><LF>
<CR><LF>
Connected<CR><LF>
Discovering LEGO HUB Service ... Found LEGO HUB Service <CR><LF>
Discovering characteristic ... Found LEGO Data Characteristic<CR><LF>

Question is Why ?


Thanks in advance

MArc

[ruppie]

An addition:
My Advertisment data is like:

const char advLEGO[] = {0x02,0x01,0x06,0x11,0x07,0x23,0xD1,0xBC,0xEA,0x5F,0x78,0x23,0x16,0xDE,0xEF,
0x12,0x12,0x23,0x16,0x00,0x00,0x09,0xFF,0x97,0x03,0x00,0x80,0x06,0x00,0x61,0x00};

When i change code like:

oAdvertisementData.addData(advLEGO);
oAdvertisementData.setManufacturerData(ManufacturerData);
pAdvertising->setAdvertisementData(oAdvertisementData);



i got another strange result :

Scanning ...<CR><LF>
[ADV 1244] Packet received from BC:DD:C2:CB:69:FA<LF>
PAYLOAD 29 bytes<LF>
09-08-4C-65-67-6F-20-48-75-62-02-01-06-11-07-23-D1-BC-EA-5F-78-23-16-DE-EF-12-12-23-16<CR><LF>
RSSI -33 dBm<LF>
ADV TYPE Connectable undirected<CR><LF>
SHORT NAME Lego Hub<LF>
128-Bit UUID #Ѽê_x#<SYN>Þï<DC2><DC2>#<SYN>00001623-1212-EFDE-1623-785FEABCD123<CR><LF>
LEGO BLE SERVICE UUID Found!<LF><CR>
<LF>
Connected<CR><LF>
Discovering LEGO HUB Service ... Found LEGO HUB Service <CR><LF>


Question:
Where is the mistake not getting target result like;

Bluefruit52 Central LEGO Scan Example<CR><LF>
------------------------------------<LF><CR>
<LF>
Scanning ...<CR><LF>
[ADV 473] Packet received from 90:84:2B:4A:3A:0C<LF>
PAYLOAD 31 bytes<LF>
02-01-06-11-07-23-D1-BC-EA-5F-78-23-16-DE-EF-12-12-23-16-00-00-09-FF-97-03-00-80-06-00-41-00<CR><LF>
RSSI -28 dBm<LF>
ADV TYPE Connectable undirected<CR><LF>
128-Bit UUID #Ѽê_x#<SYN>Þï<DC2><DC2>#<SYN>00001623-1212-EFDE-1623-785FEABCD123<CR><LF>
LEGO BLE SERVICE UUID Found!<LF>
MAN SPEC DATA 97-03-00-80-06-00-41-00<CR><LF>
<CR><LF>
Connected<CR><LF>
Discovering LEGO HUB Service ... Found LEGO HUB Service <CR><LF>

Marc

[chegewara]

Here is error:

Code: Select all

char  ManufacturerData[8] = {0x97,0x03,0x00,0x80,0x06,0x00,0x61,0x00};

char string is 0x0 terminated.
std::string is not.

Here is simple test code:

Code: Select all

#include <string>

char  ManufacturerData[8] = {0x97,0x03,0x00,0x80,0x06,0x00,0x61,0x00};
std::string test(ManufacturerData, 8);
void setup() {
  // put your setup code here, to run once:
Serial.begin(115200);
delay(100);
Serial.print("char length: ");
Serial.println(strlen(ManufacturerData));
Serial.print("std::string length: ");
Serial.println(test.length());
}

void loop() {
  // put your main code here, to run repeatedly:

}

Output:

Code: Select all

char length: 2
std::string length: 8