look and be amazed
BT/BLE Stack Libraries
BT/BLE example
This is a BLE advertising demo with virtual HCI interface.
Send Reset/ADV_PARAM/ADV_DATA/ADV_ENABLE HCI command for BLE advertising
Now
I want to see your hands.
I want to see your hands up
I want to see your hands at the top
even higher!
( why not 1000 ? You may only use fonts up to size 200. )
credit
best wishes
rudi
ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016
Moderator: ESP_flying_raijin
ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016
Last edited by rudi ;-) on Fri Sep 23, 2016 9:47 pm, edited 2 times in total.
-------------------------------------
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
-
- Posts: 34
- Joined: Wed Feb 15, 2017 8:31 pm
Re: ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016
Hi Rudi,
I made the BLE test, and is working also, but in the typw I see "classic and BLE" in your case you got only "BLE" this parameter is configurable? I ask because the current consumption is to high around 130mA
https://drive.google.com/open?id=0B7nmz ... p2Y2x1cElR
vielen dank in voraus!
I made the BLE test, and is working also, but in the typw I see "classic and BLE" in your case you got only "BLE" this parameter is configurable? I ask because the current consumption is to high around 130mA
https://drive.google.com/open?id=0B7nmz ... p2Y2x1cElR
vielen dank in voraus!
Re: ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016
i used in the example preview version of esp-idf, there was some update in the meantime.santanapablo1975 wrote:Hi Rudi,
I made the BLE test, and is working also, but in the typw I see "classic and BLE" in your case you got only "BLE" this parameter is configurable? I ask because the current consumption is to high around 130mA
https://drive.google.com/open?id=0B7nmz ... p2Y2x1cElR
vielen dank in voraus!
let us talk about in "General Discussion", "News" are informative only about News.
gern geschehen.
best wishes
rudi
edit:
@shadow
btw: https://github.com/espressif/arduino-esp32/pull/65
Last edited by rudi ;-) on Thu Feb 16, 2017 5:12 pm, edited 1 time in total.
-------------------------------------
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
Re: ESP32 "ESP-BLE-HELLO" DONE! 22 September 2016
Now create an Arduino component for BLE
Who is online
Users browsing this forum: No registered users and 5 guests