[Tool Release] FLASH_DOWNLOAD_TOOL

[Ritesh]

..
Also, we are generally using 912600 baudrate for that.
..

do you mean 912600 or 921600?

best wishes
rudi

Sorry typo mistake..

It's 921600 baudrate..

[colman]

Can you add an option in the Windows download tool to do a chip erase before flashing?

Regards,
Colman

[rudi ;-)]

@costaud
can you please add

- custom baudrate
- custom com port

[ESP_Sprite]

Also, rates near 1MBaud, like you use, are pretty finnicky to push through unbalanced, un-terminated lines. You may just be running into the limits of your hardware.

[rudi ;-)]

Also, rates near 1MBaud, like you use, are pretty finnicky to push through unbalanced, un-terminated lines. You may just be running into the limits of your hardware.

esp32 watterott - nano32 board support 3Mbit
with esptool.py (msys32 esptool_py and windows ) no problem to flash with 2Mbit and 3Mbit and a custom baudrate

( *nix cp driver have a problem over 2MB )


btw: esptool.py support 2Mbit and custom baudrate in menuconfig
but windows Flash_download_tool is only 1152000

x.jpg large.jpg (150.16 KiB) Viewed 21360 times

but can't select custom baudrate and more as 1152000 on windows flash tool
it is limited by the Software

limited_1152000.png (7.73 KiB) Viewed 21360 times

@costaud
- please add backup function ( backup the full flash to one combine binary )
or please open the source again like in the past and we do by self

@jeroen
not sure why this is not more open source now?
the source files not more in the zipped - do you know why?
where we can get?

[rudi ;-)]

2017.09.25
Win Flash Download Tool
V3.6.1.0 online

flash_download_tools_v3.6.1.0.zip

(8.93 MiB) Downloaded 1369 times

best wishes
rudi

[rudi ;-)]

2017.11.16
Win Flash Download Tool
V3.6.2.0 online

flash_download_tools_v3.6.2_0.rar

flash_download_tools V. 3.6.2_0

(9.53 MiB) Downloaded 1231 times

best wishes
rudi

[rudi ;-)]

2017.11.30
Win Flash Download Tool
V3.6.2.2 online

flash_download_tools_v3.6.2.2.rar

flash download tools v3.6.2.2

(9.38 MiB) Downloaded 1158 times

best wishes
rudi

[AAAwen]

Dear All,

How can I set the address behind the Path Panel? Thank you!

路径栏后面的地址怎么填写？

[colman]

V3.6.2.2 cannot run on my Windows, attached is the console error message.