TG0WDT_SYS_RESET after two DEEPSLEEP_RESET

User avatar
rudi ;-)
Posts: 1729
Joined: Fri Nov 13, 2015 3:25 pm

Re: TG0WDT_SYS_RESET after two DEEPSLEEP_RESET

Postby rudi ;-) » Sun Jul 09, 2017 8:31 pm

WiFive wrote:
rudi ;-) wrote: ulp has I2C Master "HW" driver
The ULP co-processor can use a separate I2C controller, located in the RTC domain, to communicate with
external I2C slave devices. RTC_I2C has a limited feature set, compared to I2C0/I2C1 peripherals.

can use a separate I2C controller, located in the RTC domain

HW or SW mode?
:)
-------------------------------------
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪

WiFive
Posts: 3529
Joined: Tue Dec 01, 2015 7:35 am

Re: TG0WDT_SYS_RESET after two DEEPSLEEP_RESET

Postby WiFive » Sun Jul 09, 2017 9:57 pm

rudi ;-) wrote: HW or SW mode?
HW but I see it is not in the ulp instruction set document yet

User avatar
rudi ;-)
Posts: 1729
Joined: Fri Nov 13, 2015 3:25 pm

Re: TG0WDT_SYS_RESET after two DEEPSLEEP_RESET

Postby rudi ;-) » Sun Jul 09, 2017 10:13 pm

WiFive wrote:
rudi ;-) wrote: HW or SW mode?
HW but I see it is not in the ulp instruction set document yet
( txs WiFive Io12 )

I mean that there was a talk on Bit Bang in the past from Ivan
but i am not more sure "today" the IO15 and IO12 theme is more than embarrassing
something like this must not happen. txs again WIFive - you saw the mistake and you talk to me on a silence way that i did wrong.
txs my friend! i take now a rest - here is 00:15 AM
-------------------------------------
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪

WiFive
Posts: 3529
Joined: Tue Dec 01, 2015 7:35 am

Re: TG0WDT_SYS_RESET after two DEEPSLEEP_RESET

Postby WiFive » Sun Jul 09, 2017 10:27 pm

rudi ;-) wrote:
I mean that there was a talk on Bit Bang in the past from Ivan
That was for SPI

No worries, we here to help each other. I wait for your next conspiracy report. ;)

Who is online

Users browsing this forum: No registered users and 7 guests