Hi,
A simple question; which usb C should I connect to the PC, the one in the blue base or the one in the scree?
TIA
John
Reset to factory
-
ESP_Rachel
- Posts: 96
- Joined: Wed Nov 10, 2021 9:28 am
Re: Reset to factory
You can use the USB-C in the screen either for both powering and flashing the firmware.
Additionally, there are two blue bases with a USB-C port, but please take note of the following:
- the USB-C port on the ESP32-S3-BOX-3-DOCK base is designated for power only
- but the USB-C port on the ESP32-S3-BOX-3-SENSOR base can be used for both powering and as a regular USB device
For more in-depth information on the Technical Specification, kindly refer to the documentation: https://github.com/espressif/esp-box/bl ... r_box_3.md
Additionally, there are two blue bases with a USB-C port, but please take note of the following:
- the USB-C port on the ESP32-S3-BOX-3-DOCK base is designated for power only
- but the USB-C port on the ESP32-S3-BOX-3-SENSOR base can be used for both powering and as a regular USB device
For more in-depth information on the Technical Specification, kindly refer to the documentation: https://github.com/espressif/esp-box/bl ... r_box_3.md
Who is online
Users browsing this forum: No registered users and 17 guests