BLE Services and Characteristics are not shown in ESP32C3-MINI1

[fahirad]

Hello,

I have been trying to figure out why the services and characteristics are not shown when I configure my device as a BLE Server using AT commands.

I have followed this link exactly for flashing the firmware https://docs.espressif.com/projects/esp ... le_it.html and have managed to do so. However, I have the problem I have mentioned.

To establish the Server I use the following commands:

Code: Select all

AT+BLEINIT=2
AT+BLEGATTSSRVCRE
AT+BLEGATTSSRVSTART
AT+BLEADVDATAEX="halva","A002","0102030405",1
AT+BLEADVSTART

which all return

Code: Select all

OK

. Still when I connect to my device either via a BLE app on my phone, or another ESP32C3 device (configured as a client) I can only see the Generic Attribute and Generic Access.

All of the resources I managed to find explain how to deal with this via generation of ble_data.bin file, but this version uses mfg_nvs which also gets properly updated whenever I make changes to the gatts_data.csv file (the file that actually stores the ble data information).

Another thing to mention, if I use the command

Code: Select all

AT+BLEGATTSSRV?

to discover the services I get returned the services from the file, but without the UUIDs, instead only 0x is shown. (I know this is the actual services and not generic ones since I were adding more services or deleting some from the csv file and the result turned out accordingly).

Any kind of guide would be greatly appreciated, because I have managed to find very little on this topic.

Thank you,

Fahira