ESP32 Forum

Posted: **Thu Aug 15, 2024 4:04 pm**

Hi Experts,

I am moving from ESP8266 NONOS SDK to ESP32 with Arduino and learning it slowly. I am trying to create 2 tasks running in parallel. Tasks gets created execute first loop and then ESP crashes. I am attaching my simple code and Crash logs. Can someone please let me know what is wrong with the below code causing ESP crash and reboot.

Here is the code

Code: Select all

/*
   Task
 */

#include <Arduino.h>

void writeTask(void *parameter);
void readTask(void *parameter);

void setup() {
    Serial.begin(115200);

    xTaskCreate(
        writeTask,      // Function name of the task
        "Write Count",   // Name of the task (e.g. for debugging)
        2048,        // Stack size (bytes)
        NULL,        // Parameter to pass
        1,           // Task priority
        NULL         // Task handle
    );
    xTaskCreate(
        readTask,     // Function name of the task
        "Read Count",  // Name of the task (e.g. for debugging)
        2048,       // Stack size (bytes)
        NULL,       // Parameter to pass
        1,          // Task priority
        NULL        // Task handle
    );
}

void writeTask(void *parameter) {
    int i;
    for (i=0; i<100; i++);
    {
        Serial.print("Writing Task\r\n");
        delay(1000);
    }
}
void readTask(void *parameter) {
    int i;
    for (i=0; i<100; i++);
    {
        Serial.print("Read Task\r\n");
        delay(1000);
    }
}

void loop() {

}

Serial Logs:

Code: Select all

Writing Task
Read Task
Guru Meditation Error: Core  0 panic'ed (IllegalInstruction). Exception was unhandled.
Memory dump at 0x400d1294: 65e8a3a2 f01d0084 b1004136
Core  0 register dump:
PC      : 0x400d129a  PS      : 0x00060a30  A0      : 0x00000000  A1      : 0x3ffb91a0
A2      : 0x00000000  A3      : 0x00000000  A4      : 0x00000000  A5      : 0x00000000
A6      : 0x00000000  A7      : 0x00000000  A8      : 0x800d129a  A9      : 0x3ffb9180
A10     : 0x000003e8  A11     : 0x3f400120  A12     : 0x00000014  A13     : 0x00000000
A14     : 0x3ffb8188  A15     : 0x80000001  SAR     : 0x00000000  EXCCAUSE: 0x00000000
EXCVADDR: 0x00000000  LBEG    : 0x400862c1  LEND    : 0x400862d1  LCOUNT  : 0xfffffffc


Backtrace: 0x400d1297:0x3ffb91a0




ELF file SHA256: d86aa41a4e82bc60

E (1234) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ets Jun  8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:6940
ho 0 tail 12 room 4
load:0x40078000,len:15500
load:0x40080400,len:3844
entry 0x4008064c
...

Posted: **Thu Aug 15, 2024 4:56 pm**

Please ignore this post. I found the bug.

Bug is semicolon at the end of for loop. My bad.

Posted: **Thu Aug 15, 2024 7:48 pm**

Note that a task function must not return.
A task needs to either run an infinite loop, or terminate itself via vTaskDelete(NULL) at some point.

ESP32 Forum

Multiple Tasks on ESP32 with Arduino

Multiple Tasks on ESP32 with Arduino

Re: Multiple Tasks on ESP32 with Arduino

Re: Multiple Tasks on ESP32 with Arduino