Ethernet Wi-fi Bridge, or AP + STA bridge

pumpkin_pie
Posts: 5
Joined: Wed Oct 25, 2017 9:32 pm

Ethernet Wi-fi Bridge, or AP + STA bridge

Postby pumpkin_pie » Thu Oct 26, 2017 12:59 am

I was wondering if it was possible to either bridge the Ethernet to the Wi-Fi, or to put the Wi-Fi in APSTA mode and bridge the AP to the STA. Basically I want the functionality of being able to have devices connect to the ESP32 and for them to have internet through the ESP32. I imagine this should be possible, but I have not been able to unearth any native support for this type of thing? Is there any info out there about working examples of this, or steps to take to make this work?

Thanks

pumpkin_pie
Posts: 5
Joined: Wed Oct 25, 2017 9:32 pm

Re: Ethernet Wi-fi Bridge, or AP + STA bridge

Postby pumpkin_pie » Fri Oct 27, 2017 5:05 pm

I have seen an example of a NAT router for the ESP8266 here:
https://github.com/martin-ger/esp_wifi_repeater

I think NAT functionality would also be a good solution to the traffic routing problem. Does the ESP32 use a customized version of the LwIP library? Could I find a version of LwIP that supports one to many NAT and build my firmware with that library?

seigel
Posts: 2
Joined: Thu Apr 19, 2018 3:17 pm

Re: Ethernet Wi-fi Bridge, or AP + STA bridge

Postby seigel » Thu Apr 19, 2018 3:26 pm

Following. Any headway?

kitts82
Posts: 12
Joined: Mon Dec 18, 2017 11:57 am

Re: Ethernet Wi-fi Bridge, or AP + STA bridge

Postby kitts82 » Fri Jan 18, 2019 2:05 pm

Also interested in this. Bridging between ETH, STA and AP.

janis.wxyz
Posts: 1
Joined: Thu Jul 16, 2020 10:40 am

Re: Ethernet Wi-fi Bridge, or AP + STA bridge

Postby janis.wxyz » Thu Jul 16, 2020 10:44 am

This ESP32 wifi repeater has ethernet support:

https://github.com/martin-ger/esp_wifi_ ... et-support

Some info on ESP32 wireless bridging, which might be relevant for ethernet support:
https://blog.robertelder.org/routing-pa ... 6-modules/

BouncyHarpy
Posts: 1
Joined: Wed Jul 22, 2020 5:02 am

Re: Ethernet Wi-fi Bridge, or AP + STA bridge

Postby BouncyHarpy » Wed Jul 22, 2020 5:03 am

janis.wxyz wrote:
Thu Jul 16, 2020 10:44 am
This ESP32 wifi repeater has ethernet support:

https://github.com/martin-ger/esp_wifi_ ... et-support

Some info on ESP32 wireless bridging, which might be relevant for ethernet support:
https://blog.robertelder.org/routing-pa ... 6-modules/mcdvoice
I think NAT functionality would also be a good solution to the traffic routing problem.

tommyshelbyop
Posts: 1
Joined: Mon Oct 05, 2020 4:23 pm

Re: Ethernet Wi-fi Bridge, or AP + STA bridge

Postby tommyshelbyop » Mon Oct 05, 2020 4:25 pm

BouncyHarpy wrote:
Wed Jul 22, 2020 5:03 am
janis.wxyz wrote:
Thu Jul 16, 2020 10:44 am
This ESP32 wifi repeater has ethernet support:

https://github.com/martin-ger/esp_wifi_ ... et-support

Some info on ESP32 wireless bridging, which might be relevant for ethernet support:
https://blog.robertelder.org/routing-pa ... 6-modules/mcdvoice
I think NAT functionality would also be a good solution to the traffic routing problem.
can be but make sure of few things


Who is online

Users browsing this forum: No registered users and 66 guests