wake up esp32 at the end of the month

sionut
Posts: 8
Joined: Tue Oct 06, 2020 10:23 am

wake up esp32 at the end of the month

Postby sionut » Tue Oct 06, 2020 10:32 am

Hi,

The subject says it all. Is it possible to wake up ESP32 from deep sleep at the end of each month ? I would like to use it only a few minutes on the last day of the month. Power consumption is very important, this is why I would like to wake it up as seldom as possible.

Thank you !

ESP_Sprite
Posts: 9711
Joined: Thu Nov 26, 2015 4:08 am

Re: wake up esp32 at the end of the month

Postby ESP_Sprite » Tue Oct 06, 2020 2:27 pm

From what I know, you should just be able to put the ESP32 into deep sleep for 30*24*60*60 (Or 31, or 29, depending on the month) seconds. Easiest is to have hardware that has a 32KHz crystal connected to the ESP32, otherwise your wakeup time will be off by a few days or so.

sionut
Posts: 8
Joined: Tue Oct 06, 2020 10:23 am

Re: wake up esp32 at the end of the month

Postby sionut » Tue Oct 06, 2020 2:44 pm

I'm a newbie trying to enter in this domain.. :)

Could you suggest what exactly I should buy / some schematics maybe ?

Thank you !

PeterR
Posts: 621
Joined: Mon Jun 04, 2018 2:47 pm

Re: wake up esp32 at the end of the month

Postby PeterR » Tue Oct 06, 2020 10:41 pm

If in doubt try on an evaluation board. EDIT Like an EVB
I have not checked EVB RTC clocks but otherwise its a solid starter. You can get started on PRIME next day & with an EVB, some dupont n micreo/ada/whatever board.
Seems an easier entry then laying a PCB etc.
& I also believe that IDF CAN should be fixed.

Who is online

Users browsing this forum: No registered users and 71 guests