ADC1

[Adham Aboud]

Hello All,

I'm trying to test the ADC peripheral of the ESP32 using the ADC example. I've connected Source voltage (3.3 to 2.9v) to GPIO34
My problem is that the ADC value is not changing when I change the voltage.

Capture.PNG (66.68 KiB) Viewed 3747 times

Any Ideas ??

Thank you in advance

[ESP_Dazz]

The 12-bit ADC has a maximum raw reading of 4095 meaning the ADC is maxed out. Change your ADC attenuation to support a larger voltage range.