ESP32-S3 and ILI_9488

[mr__zec]

Hi, I have a question…

I don't know if I'm in the right place, but I have a problem with initializing the ILI_9488(hsd035577a5) screen.

It's about the ESP32-S3 module.

My programming and connection knowledge is about 2/100.

This is my pinout configuration:

Code: Select all

 #define TFT_MISO 14  // SDO(MISO)
#define TFT_MOSI 11  // SDI(MOSI)
#define TFT_SCLK 12  // SCK
#define TFT_CS   10  // Chip select control pin
#define TFT_DC    9  // Data Command control pin
#define TFT_RST  18  // Reset pin
#define TFT_BL(led)    5  // LED back-light control pin

I tryed Bodmers lib with many others but i failed.

Some pictures of the components are attached.

If you need any other information so you can help me, please be free to contact me.

Would really appreciate some help.

Thanks.

[rbhagwat62]

You can start with https://github.com/lvgl/lv_port_esp32. This used LVGL library for UI and has ILI_9488 driver ported for ESP32. You can also refer to https://docs.lvgl.io/master/get-started/index.html to start with LVGL

I used WT32-SC01 you can find data sheet here https://files.seeedstudio.com/products/ ... asheet.pdf

I used ESP32, but you should able to compile it with ESP32-S3 with latest IDF.