ESP32 with small PCB searched.
ESP32 with small PCB searched.
Hi,
I'm Robert from germany. I searching a ready to use small PCB with a ESP32 on it. Do you have a advice where I can find such?
It ist for a RC-Car(1:24) project.
It isn't necessary to have all pins outside, because I would like to use a bus system.
https://de.aliexpress.com/store/product ... 53522.html This looks good but it has a USB-Chip on it, witch I don't need i think.
Thank's for your help.
Robert
I'm Robert from germany. I searching a ready to use small PCB with a ESP32 on it. Do you have a advice where I can find such?
It ist for a RC-Car(1:24) project.
It isn't necessary to have all pins outside, because I would like to use a bus system.
https://de.aliexpress.com/store/product ... 53522.html This looks good but it has a USB-Chip on it, witch I don't need i think.
Thank's for your help.
Robert
-
- Posts: 9713
- Joined: Thu Nov 26, 2015 4:08 am
Re: ESP32 with small PCB searched.
Hello Robert. Have you already looked at the modules that do not have a DIP pinout? For example, the module you mentioned is based on the WROOM32 module, which is also obtainable separately.
-
- Posts: 263
- Joined: Sun Jun 19, 2016 12:00 am
Re: ESP32 with small PCB searched.
Thats the smallest that I own:
https://www.tindie.com/products/onehors ... ent-board/
The photos don't really do it justice, its amazingly small while still full-featured. Not cheap though. Remember you'll have to set the flash to DOUT mode.
https://www.tindie.com/products/onehors ... ent-board/
The photos don't really do it justice, its amazingly small while still full-featured. Not cheap though. Remember you'll have to set the flash to DOUT mode.
Re: ESP32 with small PCB searched.
I am waiting for a module like this:
https://www.aliexpress.com/item/Hot-sel ... 40089.html
I placed the order a few days ago.
https://www.aliexpress.com/item/Hot-sel ... 40089.html
I placed the order a few days ago.
Re: ESP32 with small PCB searched.
nice - you know, that the modul can't connect to a breadboard?lmarmisa wrote:I am waiting for a module like this:
https://www.aliexpress.com/item/Hot-sel ... 40089.html
( double pinheader pins left and right are nice but they are different signals from neighboring pin)
best wishes
rudi
-------------------------------------
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
-
- Posts: 263
- Joined: Sun Jun 19, 2016 12:00 am
Re: ESP32 with small PCB searched.
Yep, they look nice at first sight but I never use them because of this.nice - you know, that the modul can't connect to a breadboard?
( double pinheader pins left and right are nice but they are different signals from neighboring pin)
Re: ESP32 with small PCB searched.
You can solder two outer rows of pins on bottom side of board and two inner rows on toprudi ;-) wrote: nice - you know, that the modul can't connect to a breadboard?
( double pinheader pins left and right are nice but they are different signals from neighboring pin)
Re: ESP32 with small PCB searched.
Yes, I know. I will use a PCB solution. I want to explore low power consumption ESP32 designs using batteries, deep sleep and BLE.rudi ;-) wrote:nice - you know, that the modul can't connect to a breadboard?lmarmisa wrote:I am waiting for a module like this:
https://www.aliexpress.com/item/Hot-sel ... 40089.html
( double pinheader pins left and right are nice but they are different signals from neighboring pin)
best wishes
rudi
Re: ESP32 with small PCB searched.
ah one row it wants to be put on the breadboard and the other row put from abovesintech wrote:You can solder two outer rows of pins on bottom side of board and two inner rows on toprudi ;-) wrote: nice - you know, that the modul can't connect to a breadboard?
( double pinheader pins left and right are nice but they are different signals from neighboring pin)
very nice this modul becomes own special character.
then perhabs better, we connect wire from the board to the breadboard ?
Or we will take an adapter hole grid board for soldering the breakout adapter board
and then we wire the hole grid board to the breadboard -
i see - this is a good exercise for beginners
(After the exercise then:: we make then an adapter board for the hole grid board that fits on a breadboard too)
-------------------------------------
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪
Who is online
Users browsing this forum: No registered users and 71 guests