Chinese character SSID garbled，Cannot connect network

[soonrobot]

Code: Select all

#include "WiFi.h"

void setup() {
	Serial.begin(115200);

	// WiFi.mode(WIFI_AP_STA);
	WiFi.mode(WIFI_STA);

	Serial.println("\n\n\nTansys_>");
	Serial.println("WiFi.getAutoConnect() => "+String( WiFi.getAutoConnect() ));

	Serial.printf("SSID:%s\r\n", WiFi.SSID().c_str());  //
	Serial.printf("PSW:%s\r\n", WiFi.psk().c_str());    //

    WiFi.begin( WiFi.SSID().c_str(), WiFi.psk().c_str() );
    long tm = millis();
    while( WiFi.status() != WL_CONNECTED && millis()-tm < 1000*8 ) {
        delay(500);
        Serial.print(".");
    }

	if( WiFi.status() == WL_CONNECTED ){
		Serial.print("IP Address: ");
		Serial.println(WiFi.localIP());

	}else{

		WiFi.beginSmartConfig();

		Serial.println("Waiting for SmartConfig.");
		while (!WiFi.smartConfigDone()) {
			delay(500);
			Serial.print(".");
		}

		Serial.println("");
		Serial.println("SmartConfig received.");

		Serial.println("Waiting for WiFi");
		while (WiFi.status() != WL_CONNECTED) {
			delay(500);
			Serial.print(".");
		}

		Serial.println("WiFi Connected.");

		Serial.print("IP Address: ");
		Serial.println(WiFi.localIP());
	}

}

void loop() {

}

Description:

1.SSID returns empty，I have modified the“ WiFiSTA.cpp”。
2.Chinese character SSID garbled，Cannot connect network！

p1.png (10.28 KiB) Viewed 3766 times

p2.png (19.95 KiB) Viewed 3766 times

p3.png (54.51 KiB) Viewed 3766 times