How to add ESP32 in Arduino for Mac?

[jamesliang]

I try follow github to add ESP32 on mac,but still not show in Arduino IDE (1.6.12) .
Please show me step by step.Thanks!

[ESP_Me-no-dev]

first open Terminal.app
then:

Code: Select all

mkdir -p ~/Documents/Arduino/hardware/espressif
cd /Documents/Arduino/hardware/espressif
git clone https://github.com/espressif/arduino-esp32.git esp32
cd esp32/tools
python get.py

then open/restart Arduino IDE

[jamesliang]

first open Terminal.app
then:

Code: Select all

mkdir -p ~/Documents/Arduino/hardware/espressif
cd /Documents/Arduino/hardware/espressif
git clone https://github.com/espressif/arduino-esp32.git esp32
cd esp32/tools
python get.py

then open/restart Arduino IDE

Thanks for your help!
I do it several times, but IDE still no show ESP32 options.
Any suggestion?

螢幕快照 2016-10-21 下午1.21.04.png (87.77 KiB) Viewed 18223 times

[lakid74]

It works for me...can you go into the directories you've created and type 'pwd' ?

[jamesliang]

Thanks a lot!
Finally it shows up.
It's my mistake to input all the code at once.
Should be run step by step.

螢幕快照 2016-10-26 上午9.42.29.png (19.03 KiB) Viewed 18052 times

[ironsteam]

Hi All!

I believe line 2 with the cd should be relative to the home directory.

Code: Select all

mkdir -p ~/Documents/Arduino/hardware/espressif
cd ~/Documents/Arduino/hardware/espressif
git clone https://github.com/espressif/arduino-esp32.git esp32
cd esp32/tools
python get.py

Cheers!

[Alexandre_Ganso]

Ok, I found it. If you have a different sketch directory in your preferences, the script will obviously not work. So, you need to check where your sketch directory is.