Mesh -demo on WROOM-32
Posted: Wed Oct 11, 2017 4:48 pm
Hi,
I trying to port ESP Mesh_demo in to the WROOM-32.
https://github.com/espressif/ESP8266_MESH_DEMO
1. Is it possible to port it on Wroom32 ,as it is mentioned in espressif site as esp8266 code.
2. When I tried falshing in wroom ,I could flash but getting error as "Flash read Error 0x1000" and RTWDT keep resetting the device.
After flashing ,I set
GPIO15 - High
GPIO0 - High
GPIO12 - Low
EN - High
I also doubt the 4 bin generated is really for WROOM-32 and will it work,which same memory Mapping,I am using Flash download tool given by espressif to flash.
Thanks,
E.K
I trying to port ESP Mesh_demo in to the WROOM-32.
https://github.com/espressif/ESP8266_MESH_DEMO
1. Is it possible to port it on Wroom32 ,as it is mentioned in espressif site as esp8266 code.
2. When I tried falshing in wroom ,I could flash but getting error as "Flash read Error 0x1000" and RTWDT keep resetting the device.
After flashing ,I set
GPIO15 - High
GPIO0 - High
GPIO12 - Low
EN - High
I also doubt the 4 bin generated is really for WROOM-32 and will it work,which same memory Mapping,I am using Flash download tool given by espressif to flash.
Thanks,
E.K