undefined reference to `port_clear_status(EVENT_GROUP_SELECT_T, unsigned long)'

[greenstone]

Hi guys.

When I tried to compile my source, it failed saying
undefined reference to `port_clear_status(EVENT_GROUP_SELECT_T, unsigned long)'
.

Here is my directory structure.
- components
-- hal_param_manage
--------hal_param_manage.c
--------hal_param_manage.h
CMakeLists.txt
--linux_list
--------linux_list.c
--------linux_list.h
CMakeLists.txt
--main_config
-----main_config.c
------main_config.h
------ CMakeLists.txt
--port_debug
------- port_debug.h
------- CMakeLists.txt
--port_event
-------- port_event.c
-------- port_event.h
------- CMakeLists.txt
--port_timer
------- port_timer.c
------- port_timer.h
------- CMakeLists.txt
--wifi_app
------- wifi_device.c
------- wifi_device.h
------- CMakeLists.txt

-main
--------user_ main.c
-------CMakeLists.txt
Here is main.c source code.
代码： 全选

#include <stdio.h>
#include <string.h>
#include <stdlib.h>

#include "port_event.h"
#include "port_timer.h"
#include "main_config.h"
#include "port_debug.h"
#include "hal_param_manage.h"
#include "wifi_device.h"

#define APP_MAIN_DEBUG_TAG "main_debug"

char _uid[LQWY_DEV_UID_MAX_LENGTH] = {0}; /*全局64维数组，初始化为0*/
char _gid[LQWY_DEV_GID_MAX_LENGTH] = {0}; /*全局32维数组，初始化为0*/
int frame_interval_time = 0; /*全局uint32_t，初始化为0，帧上送时间间隔*/

/*esp32开发板型号：ESP32-WROOM-32*/
void app_main()
{
port_event_init() ; /*全局变量---创建事件组结构体中的各个事件组对象，用于线程间通信,全局事件组port_event结构体对象
port_event初始化*/
port_timer_sys_isr_init(0.05) ; //全局变量--50ms定时器中断初始化，全局定时器对象sys_port_timer初始化,并轮询定时器任务节点，调用定时器节点的回调函数
update_time_stamp(1582461934) ; /*设置UNIX时间戳*/
hal_param_init(); //定了了参数信息管理头结点和参数信息node节点，挂接在一起，然后循环遍历各节点，从flash读，读不到就写入节点默认值到nvs flash

//_uid,_gid,frame_interval_time全局过程变量初始化(从flash中读取并放入_uid中)
/*从flash中依据key，读出对应的值放入buf_value数组中，读取的长度是buf_len*/
if(hal_param_read((char *)LQWY_PARAM_UID_KEY,(uint8_t *)_uid,sizeof(_uid)) == PARAM_IS_OK) /*全局64维数组，初始化为0*/
{
ESP_LOGI(APP_MAIN_DEBUG_TAG,"gid %s \r\n",_uid);
}

if(hal_param_read((char *)LQWY_PARAM_GID_KEY,(uint8_t *)_gid,sizeof(_gid)) == PARAM_IS_OK) /*全局32维数组，初始化为0*/
{
ESP_LOGI(APP_MAIN_DEBUG_TAG,"uid %s \r\n",_gid);
}
/*全局uint32_t，初始化为0*/
if(hal_param_read((char *)LQWY_FRAME_SEC_KEY,(uint8_t *)&frame_interval_time,sizeof(frame_interval_time)) == PARAM_IS_OK)
{
ESP_LOGI(APP_MAIN_DEBUG_TAG,"frame_interval_time %d \r\n",frame_interval_time);
}

wifi_stack_init(); //After adding this call and component "wifi_app",project linking error,ohterwise project linking correct

return ;
}

the error file wifi_device.c->event handler
static void event_handler(void *arg, esp_event_base_t event_base,int32_t event_id, void* event_data)
{
EventBits_t uxBits = 0 ; //等待事件组某一位的返回值，真正的事件组位的值

if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) //WIFI事件：站点启动
{
WIFI_DEV_DEBUG_I("SYSTEM_EVENT_STA_START\n");
esp_wifi_connect();
}
else if(event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED) //站点模式断开
{
port_clear_status(WIFI_STATUS_SELECT, WIFI_STA_CONNECTED_BIT); //清零-STA模式已经连接上ap
WIFI_DEV_DEBUG_I("connect to the AP fail\n");

uxBits = port_get_status(WIFI_STATUS_SELECT,WIFI_STA_CONFIG_EN_BIT,pdFALSE,pdFALSE,0); //得到WIFI已配置位
if((uxBits & WIFI_STA_CONFIG_EN_BIT)) //已经配置
{
WIFI_DEV_DEBUG_I("config is ok pass is error\r\n");
port_clear_status(WIFI_STATUS_SELECT,WIFI_STA_CONFIG_EN_BIT); //清0-STA模式配置OK位
}
}
else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) { //站点模式得到IP
s_retry_num = 0;
port_set_status(WIFI_STATUS_SELECT, WIFI_STA_CONNECTED_BIT); //置1-STA模式已连接上热点
port_clear_status(WIFI_STATUS_SELECT,WIFI_STA_CONFIG_EN_BIT); //清0 STA配置使能位
ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
WIFI_DEV_DEBUG_I(WIFI_Device_DEBUG_TAG,"got ip:" IPSTR, IP2STR(&event->ip_info.ip));

}
else if(event_id == WIFI_EVENT_AP_STACONNECTED) //作为热点模式已经被客户端连接
{
wifi_event_ap_staconnected_t* event = (wifi_event_ap_staconnected_t*) event_data;
WIFI_DEV_DEBUG_I(WIFI_Device_DEBUG_TAG, "station" MACSTR" join, AID=%d",MAC2STR(event->mac), event->aid);
port_set_status(WIFI_STATUS_SELECT,WIFI_AP_CONNECTED_BIT);
}
else if (event_id == WIFI_EVENT_AP_STADISCONNECTED) {
wifi_event_ap_stadisconnected_t* event = (wifi_event_ap_stadisconnected_t*) event_data;
WIFI_DEV_DEBUG_I(WIFI_Device_DEBUG_TAG, "station " MACSTR " leave, AID=%d",MAC2STR(event->mac), event->aid);
port_clear_status(WIFI_STATUS_SELECT,WIFI_AP_CONNECTED_BIT);
}
else if(event_id == WIFI_EVENT_SCAN_DONE) //完成了热点扫描
{
port_set_status(WIFI_STATUS_SELECT, WIFI_STA_SCAN_BIT);
WIFI_DEV_DEBUG_I(WIFI_Device_DEBUG_TAG,"SYSTEM_EVENT_SCAN_DONE");
}
}
port_set_status/port_clear_status is in components “port_event”。

app_main(main)->wifi_stack_init(wifi_app)->event_handler(wifi_app)->port_set/get_status(port_event)
What is wrong?
Sorry for such a beginner question,Dependces is correctly added.

The project is attached in the appendix.
windows enviroment,idf version is V5.3.0

[greenstone]

windows enviroment,idf version is V5.3.0

[greenstone]

我把 event_handler中调用的port_event组件中定义的port_set/get/clean_status函数，直接用xEventGroupSet/get/cleanBits（即freertos组件的API函数替代），工程编译就成功了。虽然成功，但是还想请大神指点下，自定义的组件，难道不能被别的组件访问吗？而且还加入了依赖，百思不得解。