ESP32-C2: Too little Ram left after BLE and WiFi init.

[Aliveri]

ble and WiFi functions were added to the firmware, and the initial available ram was only 136k. When the program ble and WiFi initialization are finished, only 28k ram remains. Whether there is room for optimization

Snipaste_2024-08-07_10-44-08.png (100.37 KiB) Viewed 693 times

[ESP_Sprite]

Potentially you can go through menuconfig, shrink/lower some of the buffers WiFi/BLE uses.

[ESP_frhr]

Hello,

maybe the following docs may help
https://docs.espressif.com/projects/esp ... erall-size
https://docs.espressif.com/projects/esp ... imizations

Thank you