Hi,
i recently bought esp32-c3 . Already have esp32 and ESP-IDF for esp32 in my laptop.
Can i place esp32-c3's ESP-IDF together in the same directory as for ESP-IDF for esp32 ?
Since there is only 1 IDF_PATH for 2 different modules, how should i arrange it?
Looked thru yr documentation, can't find any on that issue.
Thanks.
esp32-c3 >> 2 ESP-IDF for 2 different modules
-
- Posts: 9308
- Joined: Thu Nov 26, 2015 4:08 am
Re: esp32-c3 >> 2 ESP-IDF for 2 different modules
There is no 'ESP-IDF for the C3' specifically: if you have a recent enough ESP-IDF, it will support both chips. Unless you need to hang on to an older ESP-IDF, it's likely easiest to simply make sure your current directory has an ESP-IDF new enough to support the C3, and upgrade if it does not.
Re: esp32-c3 >> 2 ESP-IDF for 2 different modules
Noted. thanks for the explanation.
have already done the upgrading
on going learning continues ...
have already done the upgrading
on going learning continues ...
学习中找战友。