Re: OTA firmware update error
Posted: Tue Aug 01, 2023 1:14 am
Hi,
Could someone from espressif confirm if espressif will test this ?
Thank's.
Could someone from espressif confirm if espressif will test this ?
Thank's.
Hi ESP_Sprite,ESP_Sprite wrote: ↑Tue Aug 01, 2023 2:02 amLemme ask around, see if anyone knows about this. If not, you may be best off creating a minimal example and posting it as a bug on the ESP-IDF Github.
Just to check, do you know if the image made it to the OTA location succesfully? You can dump the flash at that location using esptool and do a binary compare against the OTA image to check.
Code: Select all
the stub currently doesn't support quad flash chips larger than 16MB (only octal) - this feature is being worked on.
Hi @rudirudi ;-) wrote: ↑Tue Aug 01, 2023 8:52 pmhi @Baldhead,
just for asking:
which "ota project" you using?
is it an "older" from an prev Version of the actually ESP-IDF you use or is this project up2date with the actually ESP-IDF in all`?
- esptool from the ESP-IDF or from the repo?
- component manager from the ESP-IDF ( install / export ) or from the repo
- is all the same version compatibility or did you see anything in the "install" also in the "export" ..or "idf_cmd_init.bat" ?
never delete .espressif - just rename it - so there you can allways switch back to your fav working env
best wishes
rudi![]()
Hi @BaldheadBaldhead wrote: ↑Tue Aug 01, 2023 9:39 pmHi @rudirudi ;-) wrote: ↑Tue Aug 01, 2023 8:52 pmhi @Baldhead,
just for asking:
which "ota project" you using?
is it an "older" from an prev Version of the actually ESP-IDF you use or is this project up2date with the actually ESP-IDF in all`?
- esptool from the ESP-IDF or from the repo?
- component manager from the ESP-IDF ( install / export ) or from the repo
- is all the same version compatibility or did you see anything in the "install" also in the "export" ..or "idf_cmd_init.bat" ?
never delete .espressif - just rename it - so there you can allways switch back to your fav working env
best wishes
rudi![]()
,
I don't know if I understood your question very well.
I am using esp-idf v5.1(last stable version).
My project is "old".
I am using visual studio code and the vsc espressif extension inside visual studio code to installing all the tools and the esp-idf v5.1.
I have only one version of esp-idf and tools installed in my windows 11 computer.
I configured some env variables in windows too.