openocd & esp32 Freematics ONE+ on Linux
Posted: Mon Jul 02, 2018 9:22 pm
Hi.
With reference to this other thread on DevKitC I am creating a new thread since my board is different, it's a Freematics ONE+, although I am also using Debian on amd64.
lsusb shows:
I have placed a (modified) /etc/udev/rules.d/99-openocd.rules with added lines and restarted udev:
I have no idea whether this board has its own JTAG adapter or not. Neither the manufacturer's website nor their forum make any mention of openocd. I got as far as building openocd-esp32 and trying a few examples, including those mentioned in the thread above.
Now I am a bit lost. How do I find out whether I need an external adapter or just a config tweak?
Thanks,
Andrea.
With reference to this other thread on DevKitC I am creating a new thread since my board is different, it's a Freematics ONE+, although I am also using Debian on amd64.
lsusb shows:
Code: Select all
Bus 002 Device 015: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Code: Select all
# Custom (Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light)
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE="664", GROUP="plugdev"
Now I am a bit lost. How do I find out whether I need an external adapter or just a config tweak?
Thanks,
Andrea.