Which a periphery is named as "AMP" in Errata sheet?
Posted: Mon Sep 11, 2023 6:39 am
Hello!
In https://www.espressif.com/sites/default ... ata_en.pdf on 3.11 you can read
"3.11. When certain RTC peripherals are powered on, the inputs of GPIO36 and GPIO39 will be pulled down for approximately 80 ns.
Details:
Powering on the following RTC peripherals will trigger this issue:
• SAR ADC1
• SAR ADC2
• AMP ..."
What is means "AMP"?
Thank's.
In https://www.espressif.com/sites/default ... ata_en.pdf on 3.11 you can read
"3.11. When certain RTC peripherals are powered on, the inputs of GPIO36 and GPIO39 will be pulled down for approximately 80 ns.
Details:
Powering on the following RTC peripherals will trigger this issue:
• SAR ADC1
• SAR ADC2
• AMP ..."
What is means "AMP"?
Thank's.