Any official IDE with robust and easy to use debug would be great

Deouss wrote: ↑

Tue Oct 09, 2018 3:58 pm

dzRBRglobal wrote:An official IDE based on eclipse from ESP would be great

Or official Visual Studio Code IDF/Debug/C/C++/C# plug-in would be more awesome

An official IDE based on eclipse from ESP would be great

Thank you very much for your reply.
So what is the work around for now if I want to use DMA ? define a GPIO and set it in pre call function and reset in post call function?

When capture signal on my digital analyzer in mode 3, the digital analyzer always complains "CLK idle error". If I set my digital analyzer to mode 0, it can decode the signal. I found the CS pulls down at same time of CLK. Should the CS pull down before CLK?

Did you try set the rx bits to 40 and see what happens?

as gerekon metioned in this link:
https://github.com/espressif/openocd-esp32/issues/51

After I update my openocd to 2018-07-24 the problem is fixed.

Please follow instructions listed here to generate OpenOCD log file: https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/jtag-debugging/tips-and-quirks.html#jtag-debugging-tip-reporting-issues Then upload the log file here or to GitHub issue tracker https://github.com/espressif/openocd...

Hi igrr,
Thank you very for your immediate reply. I will follow the instruction and upload the log.

here is a screen shot of the error message

An update to JTAG debugging guide in IDF is in progress, but for now you can keep using OpenOCD as you used it in the past, and it will allow you to set more breakpoints. Previously the limit was 2 hardware breakpoints, and now the limit is 2 hardware + 32 software breakpoints in Flash + 32 softwar...