Hello I use ESP-IDF v 3.1.2 devbord - ESP32-PICO-KIT. I try to realize wi-fi sniffer, send via UART captured 802.11 frame. Also in asynchronous mode receive settings from PC. So, this code is initialize UART uart_config_t uart_cfg = { .baud_rate = UART_2_PC_BAUD_RATE, .data_bits = UART_DATA_8_BITS, ...

2. I don't fully understand the purpose of pre_cb and post_cb callback. When do we use them? This is an additional functionality. For example, you have LCD with SPI interface. This LCD has 1 input: "0" - spi transfer data, "1" spi transfer command. So you can use pre_cb to set this pin. 3. The ADS1...

2 vonnieda thank you for fast reply As I see the troubleshooting was from Eclipse. First trouble - when I press "build" - current version of Eclipse don't save changes Second trouble - the flashing start work properly after I done "make all", "make flash" in console, after that build and flash under...

I believe there should not be any function to decrypt message due to security reason at stack level still need to confirm with Espressif Team for that. I mean use this "magic function" ( like wpa2_decrypt(*message, *wpa2_key)) to decrypt message into my wi-fi network. For example, I have some devic...

Hello Host OS: Linux 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Linux Mint 19.1 Mate esp32: ESP32-PICO-KIT V4 board ESP-IDF: $ git describe --tags --dirty v3.3-beta1-169-g3c94b6e10 I changed the owner for "/opt/esp32/*" - current owner is me/user In ...

Hi Now my query is how can I check that received payload is encrypted or not? Look at the MAC header -> Frame Control -> Protected Frame Field However, this bit indicate only thst frame is encrypted, but what type of encryption - WEP/WPA/WPA2 - has no information Question continued for example, I kn...

(how much EPs did you have in mind, by the way, and did you have a specific purpose in mind? for example to realize usb-sniffer. Is it possible to reduce power consuption? ESP32: Transmit BT/BLE, POUT = 0 dBm - 130 - mA nRF52832: TX only run current PRF = 0dBm 11.6 mA The support 802.15.4 also will...

May be more friendly name of GPIO? esp32_01.png I mean at current version of ESP32/ESP32-PICO-D4 "pad 10" == "IO34" Or if we look the documentation https://www.espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf page 9 "IO 15" == "pad 21" == "RTC_GPIO 13" .... wtf??? why "...

Well
CPU Frequency - 240MHz
Flash SPI speed - 80 MHz
At this moment - maximum stable frequensy of SPI = 18MHz.
(Send command and data to MAX3421E to blink led)
Perhups, the long wire don't allow setup SPI CLK more up

My result: in case use HSPI & VSPI mapped like this: HSPI_CLK = 14 or 25 GPIO HSPI_MOSI = 13 or 26 GPIO HSPI_MISO = 12 or 32 GPIO HSPI_CS = 15 or 33 GPIO VSPI_CLK = 18 or 21 GPIO VSPI_MOSI = 23 or 22 GPIO VSPI_MISO = 19 or 19 GPIO VSPI_CS = 05 or 23 GPIO the maximum speed of CLK is 9 MHz. photo_2018...