firefox browser supports opus codec.I changed this example https://github.com/espressif/esp-adf/tree/master/examples/recorder/pipeline_raw_http to stream opus to server.The example connects to the server, but I need to be a server. DOES ADF HTTP Stream only supports client mode, or I'm wrong? What t...

// Enable slave mode (sampling clock is external) I2S0.conf.rx_slave_mod = 1; // Enable parallel mode I2S0.conf2.lcd_en = 1; // Use HSYNC/VSYNC/HREF to control sampling I2S0.conf2.camera_en = 1; // Configure clock divider I2S0.clkm_conf.clkm_div_a = 1; I2S0.clkm_conf.clkm_div_b = 0; I2S0.clkm_conf....

installed a new arduino 1.8.8 \and esp32 sdk (https://dl.espressif.com/dl/package_esp32_index.json) in sdkconfig CONFIG_LOG_DEFAULT_LEVEL 1 to 5 in the arduino Core Debug Level :VERBOSE in the project: setup() { esp_log_level_set("*", ESP_LOG_VERBOSE); } but when project https://github.com/lewisxhe/...

i trying to use project https://github.com/LilyGO/ESP32-Camera with wemos lolin32 https://wiki.wemos.cc/_media/products:lolin32:lolon32_v1.0.0_2_16x9.jpg The project has the following settings xclk_freq_hz = 20000000 Camera clock frequency in .ino files. But further in the library(ov264_drive.c) thi...

i trying to use project https://github.com/LilyGO/ESP32-Camera with wemos lolin32 https://wiki.wemos.cc/_media/products:lolin32:lolon32_v1.0.0_2_16x9.jpg The project has the following settings xclk_freq_hz = 20000000 Camera clock frequency in .ino files. But further in the library(ov264_drive.c) thi...

THIS IS MY RESULTS https://youtu.be/EdIFQ_LUx3Y

I made some changes and a test function. #define send_buff_size 1280 #define FIFO_Pin_3 14 #define FIFO_Pin_4 15 #define FIFO_Pin_5 32 #define FIFO_Pin_6 33 #define FIFO_Pin_7 34 #define FIFO_Pin_8 35 //#define RESET #define FIFO_WEN 2 #define FIFO_WRST 4 #define FIFO_RCK 26//16 #define FIFO_RRST 17...

I have edited the topic.

rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) Error occurs when I read the state of the gpio in the buffer. #define send_buff_size 1280 uint8_t databuff[send_buff_size]; uint8_t ov7670_read(void){ uint8_t val=0; gpio_set_level(FIFO_RCK, 1); if (gpio_get_level(FIFO_Pin_1)) val|= (1<<7); ...