Did you find a solution? I have the same problem. Or kinda.

No Problem on a WROVER-KIT. The same code starts without problems. On the DecKitC I have to press the "EN" button. As far as I remember I hadn't had any problems when just using a simple blink example.

Hi, I have been looking for a simple example using ESP32 to receive UDP packets, but couldnt find any good commented examples. From my understanding the underlying library is lwip, can anyone maybe clarify how to close the gap for using lwip with ESP32? Maybe someone is willing to help out with a li...

Here is the code. Should light up the first LED full brightness on all channels. I would love to update all channel simultaneously, I have to dig deeper on that topic. Maybe I can postpone the SK6812 terminator in some way. /* // Std. C #include <stdint.h> #include <stdlib.h> #include <string.h> //F...

Now it works. :D It was a defective LED :roll: RGB is working great but the white LED was broken. Now with a new LED everything works... @Vader_Mester: The color order is GRBW. But the next issue is the white glow when the blue LED is on. I guess the phosphor in the white LED is UV/blue sensitive an...

I had the carrier enabled :roll: . Now with config.tx_config.carrier_en = 0; It seems to work stable. BUT... The colors are not as expected. Every bit seems to be at the right position. But i can't get the white LED to light up standalone. It lights up (not full brightness) when all the blue bits ar...

Thanks for your reply. Waveform is measured at DIN. I altered the timings, without effect (T0H -> 400 ns and T1H -> 700 ns) The overshoot is a bit high. I increased the inline resistor from 100 Ohm to 1.2 kOhm to get rid of the over voltage. Now I am always at less than 5 Volts. I am using a 74HCT24...

Hi, using the RMT Driver I am trying to generate a signal for the SK6812 RGBW LEDs. My issue is that the LEDs are flickering in the desired color and almost unnoticeable changing colors, rather than staying at the same value. I started by manually programming the timings. The code is attached. Can a...