Thanks for the suggestion!

So, can I connect BSS138N logic level mosfet directly to ESp32 GPIO and that should suffice?
No resistor between GPIO and BSS138N should be fine?

Thanks again,
Jay

Hi, I am using ESP32-S3-WROOM-1 module on a minimal custom circuit board with 3v direct connection to a lithium battery. With one touch pin enabled, the deep sleep measured is around 100uA. Is that normal? What else should I do minimize power consumption further? Basically, I want it to monitor touc...

HI all, A newbie question so please tolerate with me. I understand that a toy motor should not be directly connected to a GPIO. However, my project is 3v battery operated and mostly in deep sleep state and it runs motor for 2 seconds approx. once a day. I would like circuit to be as simple as possib...

Hi all, I am using a single layered milled PCB and I read somewhere that stray capacitance on a CNC milled board can be more that an etched board. My question is how do I measure the stray capacitance on my boards and what is a benchmark of production board I need to match with? should I use a 100nf...

That's what I was thinking, but wanted to double check with you guys.

Thanks again

Thank you MikeMoy for suggestion. I understand that I cam mimic behavior of a bypassing on my company's captive page settings. However, when the products get to a customer, their company website's captive page will have different 'I agree' button variable name and html layout etc. Any other ideas? I...

Hi, I am trying to make a gadget which I plan to sell. Customer may want to connect to office wifi and most office organizations have free visitor/public hotspot but have to sign in in a captive page with 'I Agree' button on it. Is there anything we can do about it? How can we make ESP32 bypass this...

Any idea guys?

Thanks all.

Hi, I am following an example from here: https://techtutorialsx.com/2017/05/19/esp32-http-get-requests/ and trying to parse temperature value from a website such as https://www.wunderground.com. I understand I should be using API for this project but I am looking to make it work using regular html p...

Hi Woofy, I was wondering if your project is still going strong after four months? Also, did you use a LDO regulator or directly connected 3xAA cells to ESP32? Any electrolytic cap you added after LDO if you used a regulator? Thanks Guys, seriously, does ESP32 on battery project(using wifi of course...