Apologies if I have double posted this. I can see lots of improvements in the Eclipse IDE V3.0.0 however I can not change the C Code Formatter off default. I use a custom format (like GNU) but even though I select it the Source -> Format always seem to use K&R Built in. I can not even select other b...

I can see lots of improvements in the Eclipse IDE V3.0.0 however I can not change the C Code Formatter off default. I use a custom format (like GNU) but even though I select it the Source -> Format always seem to use K&R Built in. I can not even select other built in formatters or use "Project speci...

Our fix is to move to the 32e with 16MB flash. Unfortunately we have built 400 units with the 32e with 4MB flash

I really hope I am wrong! I had an issue using external Flash on the ESP32-WROOM-32e, it looked like GPIO6,GPIO7,GPIO8,and GPIO9 were floating so I removed the lid of the module to see if I could find continuity to the processor. It looks like these pins no longer go from the processor to the module...

We have a mature hardware and firmware using the ESP32-WROOM-32 module that uses an external 16 MB flash. In production we override the fuses for the SPI to an external 16 MB Flash and have been making this for almost 2 years. It works well. Below is the override. Config fuses: XPD_SDIO_FORCE (BLOCK...

The cause of this lag was me collecting RSSI every 10 seconds. I reduced the collection to 5 minutes and the lag went away.

wifi_ap_record_t ap;
esp_wifi_sta_get_ap_info(&ap);

Using IDF v4.3.1 I have implemented a simple http server to output debug information from a project using the ESP32. The ESP32 is connected to a router, with a good connection. The web-page has a 500ms refresh to show real time values updating on a simple web page. Initially I thought it was working...