Hello, I have the same issue. I've tried Coyote's solution but the outcome remains unchanged. I'm unable to connect to a hidden network on channels 12 or 13. My current configuration is: // Set the region wifi_country_t wifi_country = { .cc = "EU", .schan = 1, .nchan = 13, .max_tx_power = 20, .polic...

Yes, I can provide you with a schematic:

Nobody knows how to help me to solve the problem? I'm really stuck

We use ESP32-C6-WROOM-1 We produced 10 boards, seven out of ten are recognized properly by the PC as COM port. The other three are not. So D+ and D- are not swapped. However, those three faulty boards can be flashed by UART, and the rest of peripherals (WIFI, SPI,..) works properly. It seems that th...

At the moment, I have not found a solution, so I have opted to change my strategy when it comes to sending packets. I have created a socket on the Tester and another socket on the DUT. Through the sockets, I am able to send a packet from the Tester to the DUT and from the DUT see that it has receive...

I'm having an issue with my ESP32-C6 module when connecting it to my Windows 10 PC. The device is not being recognized, and I keep getting the error message "USB Device Not Recognized." Here's a summary of my setup and the steps I've taken so far: Setup: ESP32-C6 module Windows 10 Pro (version 1809)...

I am working on a project with the aim of testing that the ESP32C6 devices that are manufactured can send and receive packets both by wifi and by ethernet. For this, I am going to have a fixed device that will be the Tester and the other device will be the DUT (Device Under Test), one of the devices...

Thank you very much for your response! I have managed to load everything necessary and in the appropriate flash memory position thanks to your help! In case anyone is in the same situation, these have been the 4 commands that I have used for the ESP32C6 to load everything correctly: esptool --port C...

I have an ESP32C6 connected to COM15 port that doesn’t have a loaded firmware (FW), and I want to load a .bin FW in a non-development environment. I am using this command which seems to execute correctly, but the device remains in a state that does not start: esptool --port COM15 write_flash 0x18000...

Thanks to your comment I managed to solve the problem!