Search found 13 matches
- Wed Apr 18, 2018 4:26 am
- Forum: General Discussion
- Topic: Questions regarding flash encryption and Secure Boot
- Replies: 37
- Views: 47977
Re: Questions regarding flash encryption and Secure Boot
For download I use FLASH_DOWNLOAD_TOOLS_V3.6.4 You pushed me to the idea of writing a bootloader-encrypted.bin using espefuse.py Hello Yuriy, There is a checkbox called "DoNotChgBin" in FLASH_DOWNLOAD_TOOLS. When it is clicked, the firmware you want to download will not be changed by the SPI mode o...
- Mon Feb 27, 2017 5:02 am
- Forum: ESP-IDF
- Topic: UART baud rate
- Replies: 9
- Views: 37925
Re: UART baud rate
Hello underwater,
it is the limitation of AT command firmware. You can get a higher baudrate if you write the code by yourself
it is the limitation of AT command firmware. You can get a higher baudrate if you write the code by yourself
- Tue Feb 21, 2017 10:09 am
- Forum: General Discussion
- Topic: GPIO25 GPIO26
- Replies: 3
- Views: 7483
Re: GPIO25 GPIO26
Hello Beb1969,
Yes. You should first turn off the DAC function. Then GPIO25 and GPIO26 can be used as common GPIO pin.
Yes. You should first turn off the DAC function. Then GPIO25 and GPIO26 can be used as common GPIO pin.
- Tue Feb 21, 2017 9:59 am
- Forum: General Discussion
- Topic: Crash happen after connect AP long time
- Replies: 4
- Views: 9213
Re: Crash happen after connect AP long time
Hello xzwang,
How long did your ESP32 connect to AP? Is it sure to happen or happen by chance?
How long did your ESP32 connect to AP? Is it sure to happen or happen by chance?
- Tue Feb 21, 2017 9:31 am
- Forum: Hardware
- Topic: ADC reference voltage on external pin?
- Replies: 2
- Views: 9310
Re: ADC reference voltage on external pin?
Hi davidm,
The reference voltage for ADC is fixed to 1.1V. No other pins are allowed to use as reference voltage.
The reference voltage for ADC is fixed to 1.1V. No other pins are allowed to use as reference voltage.
- Fri Feb 10, 2017 5:59 am
- Forum: General Discussion
- Topic: ADC speed?
- Replies: 30
- Views: 91827
Re: ADC speed?
Hello vbastani,
The sample frequency is 6KHZ. We have 12-bit SAR ADC up to 18 channels.
The sample frequency is 6KHZ. We have 12-bit SAR ADC up to 18 channels.
- Fri Feb 10, 2017 5:44 am
- Forum: General Discussion
- Topic: ESP32 external SRAM connection pins
- Replies: 1
- Views: 5151
Re: ESP32 external SRAM connection pins
Hello t_bostanjyan,
You can download this document and then you can get the answer by yourself
http://www.espressif.com/sites/default/ ... eet_en.pdf
You can download this document and then you can get the answer by yourself
http://www.espressif.com/sites/default/ ... eet_en.pdf
- Fri Feb 10, 2017 3:23 am
- Forum: Hardware
- Topic: ESP32蓝牙常开时的功耗估算。
- Replies: 2
- Views: 16893
Re: ESP32蓝牙常开时的功耗估算。
Hello andre.liu,
我们的蓝牙跟wifi天线是同一根,时分复用的。
蓝牙的功耗已经在最新的datasheet中提到。功耗情况取决于你们对BLE的参数设置,每种模式下的功耗,我们都在datasheet中提到了。
谢谢您对ESP32的使用
我们的蓝牙跟wifi天线是同一根,时分复用的。
蓝牙的功耗已经在最新的datasheet中提到。功耗情况取决于你们对BLE的参数设置,每种模式下的功耗,我们都在datasheet中提到了。
谢谢您对ESP32的使用
- Fri Feb 10, 2017 3:16 am
- Forum: General Discussion
- Topic: erase flash with flash download tool
- Replies: 1
- Views: 7855
Re: erase flash with flash download tool
Hello jumjum123,
That is quite easy. You have a blank.bin. Just copy and make it longer then you can get blank_1MB, blank_2MB and so on. Download this file using flash download tool.
That is quite easy. You have a blank.bin. Just copy and make it longer then you can get blank_1MB, blank_2MB and so on. Download this file using flash download tool.
- Fri Feb 10, 2017 3:03 am
- Forum: Hardware
- Topic: RF settings used by ESP32_FCC_WIFI_BT_20161129.bin
- Replies: 2
- Views: 6528
Re: RF settings used by ESP32_FCC_WIFI_BT_20161129.bin
Hi espola,
Because bootloader of ESP32 starts from 0x1000, the sector is empty.
Thanks
Because bootloader of ESP32 starts from 0x1000, the sector is empty.
Thanks