Okay. I will have to change the flow of the application, but if that ensures working app, I could do that.

Will there be a fix for this release anytime soon??

How could I resolve the issue if I already have the custom board. Ignore the first triggers? (Will there be this trigger for sure)
I am not using it as an ADC channel. I am only interested in digital HIGH/LOW.

Thanks.

In my app_main(), I initialise gpio where I install gpio interrupts on GPIOs 36, 39, 34. (Pulled up) What I observe is that around tick 1392-1394 (of five restarts), I get an interrupt high on pin 36. This happens continuously every time I start the application. When I read the log, it is right afte...

Could it be pulled up after it boots? It seems to be okay when I try, but could it be a problem?

I had my GPIO12 pulled up, which caused the error. (Please could someone let me know why that is the problem? GPIO12 is used for something on boot? I got the idea of pulling it down from a third party chip maker, https://cdn-learn.adafruit.com/downloads/pdf/adafruit-huzzah32-esp32-feather.pdf page 1...

Sorry, boot mode?

When I connect the chip, I get,
repeats.

Hello Espressif, I have made a new custom board. It is an updated version with more peripherals, such as colour sensor, etc. (It uses WROOM-32 module) I am getting a new error. I do not know what may have gone wrong. I am consulting the circuit company, but in the meantime, your help is greatly appr...

Hello guys, I have been developing this product using our ESP32 chip. It has not been so easy, but the chip is so powerful, that everything we wanted to achieve was achievable. It is a smart IoT diffuser, that connects to the cloud, so you can control it while away. With the mobile application, it c...

You can utilise Blufi application, and once you get 'GOT_IP' signal, you can save the ssid and password in the flash memory.

Please refer the blufi example, nvs_rw_blob example.

@cornelis, thank you for sharing your code. I shall git it a try. Cheers