Search found 154 matches
- Mon Jan 15, 2024 11:54 am
- Forum: ESP-AT 中文讨论版
- Topic: 如何寫入bootloader.bin 與 pattiion.bin
- Replies: 1
- Views: 11756
Re: 如何寫入bootloader.bin 與 pattiion.bin
不支持修改 bootloader.bin 和 partition.bin。因为这是非常危险的操作,一旦在写入过程中掉线,由于未完全写入,设备可能会变砖。
- Tue Dec 05, 2023 1:13 pm
- Forum: ESP-AT
- Topic: Creating a Custom Partition for ESP-AT
- Replies: 4
- Views: 124599
Re: Creating a Custom Partition for ESP-AT
Hello drowsell, If you would like to save some data to flash, you could use AT+SYSMFG command to make it: https://docs.espressif.com/projects/esp-at/en/latest/esp32c3/AT_Command_Set/Basic_AT_Commands.html#cmd-sysmfg For example, you want to save "hello world", you can send AT+SYSMFG=2,"factory_param...
- Tue Dec 05, 2023 12:58 pm
- Forum: ESP-AT
- Topic: Log port pins canot be chaged
- Replies: 1
- Views: 19667
Re: Log port pins canot be chaged
Hi mateuszfio, Many thanks for your report! you are right. The document is outdated due to ESP-IDF version upgrade. The right way to modify the pins of the log port as following: - ./build.py menuconfig -> Component config -> ESP System Settings -> Channel for console output -> Custom UART - ./build...
- Tue Dec 05, 2023 12:50 pm
- Forum: ESP-AT
- Topic: MQTT Error Code: AT_MQTT_PUBLISH_LENGTH_VALUE_IS_WRONG
- Replies: 1
- Views: 23352
Re: MQTT Error Code: AT_MQTT_PUBLISH_LENGTH_VALUE_IS_WRONG
Hello yukselenis,
From a code perspective, you'll only receive this MQTT error code if you send the AT+MQTTPUBRAW command with a data_len parameter less than or equal to 0.
If the issue persists, please provide logs from the AT logg port and AT command port. Thank you.
~
From a code perspective, you'll only receive this MQTT error code if you send the AT+MQTTPUBRAW command with a data_len parameter less than or equal to 0.
If the issue persists, please provide logs from the AT logg port and AT command port. Thank you.
~
- Fri Nov 17, 2023 3:15 am
- Forum: ESP-AT
- Topic: Error when try to set the MAC address of the ESP32 Ethernet
- Replies: 9
- Views: 31885
Re: Error when try to set the MAC address of the ESP32 Ethernet
this issue should be fixed after: https://github.com/espressif/esp-at/com ... c6738a24b1
please know.
please know.
- Fri Nov 17, 2023 3:14 am
- Forum: ESP-AT
- Topic: Missing "+BTDATA:" message end (terminating / CR LF) bytes.
- Replies: 3
- Views: 32905
Re: Missing "+BTDATA:" message end (terminating / CR LF) bytes.
this issue should be fixed after: https://github.com/espressif/esp-at/com ... c6738a24b1
could you please have a try.
could you please have a try.
- Tue Nov 07, 2023 2:19 am
- Forum: ESP-AT
- Topic: Missing "+BTDATA:" message end (terminating / CR LF) bytes.
- Replies: 3
- Views: 32905
Re: Missing "+BTDATA:" message end (terminating / CR LF) bytes.
thanks for your report. you are right, the terminating bytes (0x0D 0x0A) should always appear the end of "+BTDATA", it shouldn't be skipped. will fix it within next two weeeks.
- Tue Nov 07, 2023 1:58 am
- Forum: ESP-AT
- Topic: ESP32 WiFi and Ethernet connected same time
- Replies: 5
- Views: 41187
- Tue Nov 07, 2023 1:57 am
- Forum: ESP-AT
- Topic: Error when try to set the MAC address of the ESP32 Ethernet
- Replies: 9
- Views: 31885
Re: Error when try to set the MAC address of the ESP32 Ethernet
thanks for the feedback. this bugfix will sync to esp-at master branch within two weeks, please know.
~
~
- Mon Nov 06, 2023 1:19 pm
- Forum: ESP-AT
- Topic: Error when try to set the MAC address of the ESP32 Ethernet
- Replies: 9
- Views: 31885
Re: Error when try to set the MAC address of the ESP32 Ethernet
i did a bugfix for it, could you please have a try.
> use latest master branch and replace components/at/lib/ library with the attachment.
> use latest master branch and replace components/at/lib/ library with the attachment.