Hi, i'm using an ESP32 with the Arduino IDE and use the Wifi.h library actually. Now i've seen, that there is also an esp_wifi.h library. Does this library: - provide additional functions, means can be used in parallel OR - is an alternative library you can use instead of wifi.h? If yes: Is it bette...

Really no one that can help?
It's really sad: Also on my last post i didn't get any answer ;-(

Hi all, can you confirm that the SD-Card performance is very bad in core 2.0.2? I have tried this example (from the examples folder): /* * Connect the SD card to the following pins: * * SD Card | ESP32 * D2 - * D3 SS * CMD MOSI * VSS GND * VDD 3.3V * CLK SCK * VSS GND * D0 MISO * D1 - */ #include "F...

Hi, my esp32 just crashed with the following error message: assertion "dns server out of array" failed: file "/home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/lwip/lwip/src/core/dns.c",$ abort() was called at PC 0x40111d23 on core 1 ELF file SHA256: 0000000000...

Hello all, I would like to integrate a login procedure into my ESP32 Arduino Sketch as follows: 1. the ESP starts in WIFI_AP_STA mode. 2. the user connects to the accesspoint. 3. the user calls http://192.168.4.1 and gets to the login page. 4. the user enters his WLAN access data into a form and pre...

Before uploading the Original Sketch you must choose a Partition scheme which provides enough space for subsequent OTA operation. Maybe you have set a partition scheme without OTA support or with too less OTA partition.

Best wishes
Daniel

Hi,

I have the same question/problem.
mDNS in station mode works but in AP mode or in my case WIFI_AP_STA mode does not work ;-(

Really no one that can help?

Best wishes
Daniel

Hi, it seems, that WiFi.scanNetworks(); disconnects the active AP connection. I want that the user connects to AP-mode and then calls 192.168.4.1 to enter the server page. Then the user should be able to press a button "scan for Wifi networks" and then should get a list of available WiFi-networks. B...

OK, that sounds good.
Thank you for your detailed answer.

Best wishes
Daniel

Hi,

really no one that can help ;-(

Best wishes
Daniel