Hello, I am working on a mass production tool for flashing firmware and certificates on esp32 based devices. I am finding it a bit difficult to integrate esptool in my Python app and I am looking for suggestions... Currently I am invoking esptool.py as a subprocess but I think there might be a bette...

What LED strip are you using? Addressable WS2812b?

Hello everyone, I am working on a smart plug with power measurement features. I use ESP32-C3 and ADE7953 for power measurement. During development it turned out that calibration constants must be calculated for each and every device. We have designed a custom calibration device with an accurate refe...

Sorry, the issue was in hw. One of the diodes on the relay coils was soldered in the opposite way and was shorting the PSU when the GPIO is high. I didn't see that in first place because the device is consisted of 3 PCBs and this particular component wasn't visible without desoldering the PCBs

Hi guys... I am about to go crazy. I am working on a smart switch with 2 coil latching relay. I have made two prototypes - one with ESP32-C3-MINI-1U(with antenna connector) and one with ESP32-C3-MINI-1(PCB antenna). My firmware is working absolutely fine on the ESP32-C3-MINI-1 but today I received t...

Hello everyone, Please excuse my lack of in-depth knowledge about BLE but so far I haven't done any projects using BLE. My goal is to create a portable device, powered by ESP32 which has a microphone and is able to record 15sec. audio files. The audio files must then be transferred to a smartphone -...

I am experiencing a similar issue but in my case esp_timer is the currently running task. The funny thing is that I am not using esp_timer in my code and it must be some of libs my code depends on. I have spent over a month trying to debug this issue but without any success. With some changes in my ...