Have you tried a new unit?

To carry out tests with Wi-Fi... and everything related to RF, I recommend a 1A power supply to avoid problems.
if you look at the pdf there are intensity peaks of more than 800mA

How are you powering the esp32?

To set Bluetooth to high power mode on the ESP32-S3, try this: Connect the ESP32-S3 to your computer and open the Arduino IDE. In the Arduino IDE, go to the "Tools" menu and select the "Board" option. Select "ESP32 Dev Module" as the board. Go to the "Tools" menu and select the "Port" option. Select...

Yes, correct, that's how it works.

Hello, yes it is possible....But, But.... Make sure you're using the correct include paths – Arduino libraries will generally be located in a different location than standard C libraries, so you'll need to make sure you're using the correct include paths to find the Arduino header files. You can do ...

Hello, the first thing I would say: It is not advisable to remove the RTC The RTC watchdog timer plays an important role in ensuring the stability and reliability of your ESP32-based system. It works by resetting the ESP32 if it is not serviced within a certain amount of time, which can help to reco...

To fix this, you must first make sure you have PSRAM enabled in your project. To do this, you must add the following line of code to the sdkconfig.h file: #define CONFIG_SPIRAM_SUPPORT 1 Also, you should verify that you are using the latest version of the esp_camera library, as this may fix any comp...

To restore the factory board of the t-display touch display, you can follow these steps: Disconnect the board from the computer and make sure there are no other devices connected to it. Hold down the RESET button for at least 3 seconds. Without releasing the RESET button, connect the board to the co...

To set the BLE power on an ESP32, you must use the esp_ble_tx_power_set function from the BLE library and pass the desired power level as a parameter. The power level can be one of the following values: ESP_PWR_LVL_N12 (power level -12 dBm) ESP_PWR_LVL_N9 (power level -9 dBm) ESP_PWR_LVL_N6 (power l...