@ESP_BIGNACIO "Thank you for your response. Yes, I am using VSCode. I have a window with five tabs: PROBLEMS, OUTPUT, DEBUG CONSOLE, TERMINAL, and PORTS. However, in none of these tabs can I find the traces of the messages produced by the ESP_LOGx macros. This is the problem I am facing. For your in...

Hello,
When I run a debug session with OpenOCD in a Vscode environment, I don't see any error log messages on any console. I am using an ESP32S3 with JTAG access. Should I declare a terminal in launch.json, and if so, how?
Thank you for your help.

Hello, I am trying - in vain - to get the Wi-Fi provisioning example working with an ESP32S3 processor. If I use an ESP32 processor (DEVKIT with CH340), I have no issues, but with the ESP32S3, the SSID of the Access Point (softAP) cannot be discovered by the "ESP SoftAP Prov" smartphone app, and is ...

Hello, I'm trying to use an SD card reader in SPI mode. To get familiar, I used the SDSPI example. I have no difficulty with the ESP-WROVER-KIT development board and the default pin configuration. I then migrated to a LiliGO T-DISPLAY board with ESP32-S3 (without display installed). I rebuilt the ap...

Hello, Inspired by the rest_full_server example, I created an application, which stores web pages in the /datas/web-pages directory. During the debug phase, I use the "vfs semihosting" mode. As long as I'm not trying to read a file and just building a response in an ad-hoc handler, everything is fin...

Hello,
Has your problem been solved?
Why indicate "targetArchitecture": "arm64", when ESP32 is not an ARM architecture?

Hello, I have the same problem, which seems to me to have appeared with version 1.6.0 of the plugin. After installing the plugin, I am unable to perform the configuration. I have no problem with Eclipse environment or command line, only integration in VS code fails. The solution you suggest doesn't ...

Hello, To familiarize myself with the VSCODE + IDF development environment, I tried to debug the uart_echo program given in the examples. After much difficulty, I managed to download the program to my development board (wrover-kit) and activate the debugger. However, while I put a breakpoint at the ...

I wanted to be clear about this, so I put the CTS / RTS jumpers back on, and indeed with this hardware setting the JTAG port is not accessible ! By putting the jumpers, we can see on ESP-WROVER-KIT V4.1 schematic that a connection is established between CTS and TCK on the one hand and RTS and TDO on...

Hello ESP-Sprite, This is it, it is working. I have reviewed the jumpers and followed the documentation to the letter by not setting the jumpers for RTS / CTS flow control. For the other jumpers, I haven't changed anything. I don't understand why these 2 jumpers have an effect on the JTAG path, but ...