Yes, I use the lower frequency because at 20MHz the same issues occur.
Sid

I am having trouble getting reliable operation with ESP-Prog, ESP32-CAM when uploading using JTAG.

Here is the thread in the PlatformIO Community Forum that explains the issue:

https://community.platformio.org/t/esp3 ... sues/28490

Thank you,
Sid

I did find an Espressif example for this board in the IDF repository, "eth2ap". It does exactly what I want

I changed the definitions with slightly different result: #define ETH_ADDR 31 #define ETH_POWER_PIN 5 #define ETH_MDC_PIN 23 #define ETH_MDIO_PIN 18 #define ETH_TYPE ETH_PHY_TLK110 Now I see: E (138) ip101: ip101_pwrctl(295): power up timeout E (138) ip101: ip101_init(358): power control failed E (1...

Using the ESP32-DevKit as the board selection in Arduino I am now trying to use the ETH_TLK110 example sketch. At the beginning of the sketch are a number of definitions for the Ethernet PHY. Referring to the ESP32-Ethernet Kit "Getting started" guide I see the GPIO definitions for the "MDC" and "MD...

I will give that a try

Thank you, Sid

Is the ESP32-Ethernet Kit V1 supported in the Arduino IDE/Framework? I don't seem to be able to find that board.
Sid

Many thanks, that appears to enable me to send and receive multicast packets from the AP device to the network. One issue is that after the call to "ip_napt_enable" I have to use a delay, which is not a good practice. Is there an API that could be polled to know when the device is ready? After the d...

Thank you for your help. I am already using the jason2866 platform, I had an earlier problem and PlatformIO suggested using that. I do not understand how I can use that platform to achieve the result that I need as all the documentation links are for configuration with PlatformIO and that is done. I...

I would love to get a response to this question please,
Sid