I ran into a similar problem. The reason I was getting this warning is because I had erased the secondary bootloader and partition table using `esptool.py erase_flash`. Then I was using OpenOCD to try and write the application back to the ESP32. OpenOCD requires the partition table to determine the ...

I'm at tip of `master` and I'm having this _EXACT_ same issue. Debugging has always worked for me. I tried rolling back to `4.4.1` and `4.3.3` but no luck. I've been pulling my hair out all weekend. Here is my exact log: ``` ~/esp-idf$ openocd -f interface/ftdi/esp32_devkitj_v1.cfg -f target/esp32.c...

CONFIRMED: 26 Aug 2020 In order to support the ESP32, you will need to install the following packages: sudo apt update && sudo apt upgrade -y \ python-is-python3 \ python3-serial The Arduino IDE MUST NOT be installed as a .deb or .flatpak . Instead, it must be installed from the .zip file downloade...