For the ESP32-DevKitC I'm not sure if you'll find something. Designing your own and making the PCB in a low-cost PCB manufacturer is sometimes a big deal. It is what I have done: I have designed my own PCB..; If your are interested by the Gerber files, just ask ! For the ESP32-DevKitC I'm not sure ...

I'm old school and I like things like this.

I understand, and I have designed my own PCB in case I don't find a commercial one, but I am looking for a commercial one... nobody knows where i can buy one from ?...

Hi, I have received a " ESP32-DEVKITC-VE" like this one: https://www.tme.eu/fr/details/esp32-devkitc-ve/autres-kits-de-demarrage/espressif/ and I am looking for a development shield that ease with the debugging, I mean something like this: https://fr.aliexpress.com/item/1005003309403141.html My prob...

up...

Nobody knows ?

Hi,

I would like to know what is the maximum capacity of the microSD card to remain fully compatible with the ESP-32 CAM specifications: 32 Gb ? more than 32Gb ?

Thank you for your reply,
Nounours

Thank you very much Mikeymoy: it is cristal clear !

you can keep it low during flashing

Do I can or do I must: I mean is a temporary pull down to GND is enough to start the flashing process of the firmware a few seconds later ?

All the articles that I have read shows a I00 permanently to GND all along the flashing process....


Thank you,

Sorry, it was stupid... (I made a confusion between Reset and I00 connected to ground...)

Thank you for your replies,
Michel

because a floating pin is subject to electrical noise which could cause random resets It is exactly what I meant, and I supposed that when RESET is engaged, the value of R is so high (10K) that there is no risk of short circuit: I=U/R = 5/10000 = 0.5mA By the way, do I have to maintain RESET engage...

Hi, I use an ESP32 Pinboard and on this page: https://www.14core.com/wiring-and-flashing-programming-esp-32-esp32s-with-usb-ttl-uart/ it is shown that there is a 10K resistor between the +3.3V power supply and the RESET button. The RESET button can be soldered on the pinboard, but this 10K is not pr...