Hi Angus
thankyou for this, will look forward to your response and hopefully a solution

KR

Hi Angus, here is my answers to your questions 32Khz - even with this removed and the sdkconfig set to defaults "RTC and high-resolution timer" and "Internal 150khz RC Osc" its still 500uA On the PINs - i would expect this is cause an issue with the zoom module too then, but it doesn't. I can try th...

Bump.........
Come on support !!! where are you ?

Here is the units under test, as you can see these boards are bare, just the modules and some decouple caps.

this code give completely differnet results on the above modules. WROOM-32 deep sleeps at 5uA this is as expected. PICO-D4 will only deep sleep at 500uA.... !!!!!! I believe there is a silicon issue on the PICO-D4 ? why would they be so diffferent ? void app_main(void) { while(true) { printf("Sleepi...

The issue is if the modem sends 1 byte of data before the ppp is init....... a UART_DATA event type is generated thus this calls esp_handle_uart_data and tries to use pppos_input_tcpip(esp_dte->ppp, esp_dte->buffer, length); esp_dte->ppp is not init so it crashes static void uart_event_task_entry(vo...

bump anyone ?

Or is this going to be another no response ?
Support on here is terrible.

There is an issue with this example, if the modem sends back a char(s) of data when switched on the ppp control block is null. This is because in the example esp_modem_setup_ppp(dte); is called afterwards, this means esp_dte->ppp is null esp_dte->ppp = pppapi_pppos_create(&(esp_dte->pppif), pppos_lo...

Little update as support on here is slow at the best........ I'm finding these devices are very, very sensitive, my board which was giving 40mA run / 0.5mA deep sleep, is now deep sleeping at 28mA. This can only be chip silicon damage....... Having worked with(over 20years) manufactures like STM, Re...

So to ensure nothing on my target board can have an effect on the ESP32 current, i've just built another board. This board only has the ESP32, two de-coupling caps( 10uf, 100nf ) on the VDDA, and a 32Khz crystal(with 12pf CL caps). I can now see the current is down to 500uA, but this to me is still ...