Thank You so much for your help Switching to v5.2.1 solved the problem Chip Started Wifi Started Getting Auth Info , Memory : 159Kb Getting Auth Info ..... Success !, Memory : 170Kb Start Sending File : file_1024000.txt, Size : 1024000 !Ahora mismo : Wed Apr 24 14:13:01 UTC 2024, ¡Hola Mundo! Finish...

In brief words - We have to mount and un-mount sdCard on regular basis - First time we do this -> no leak - 2nd time mounting doesn't leak memory either - 2nd un-mount of the sdCard leaks memory Chip : ESP32 (rev 1) IDF : ESP-IDF v5.1.3-416-gd23b7a0361 Reproduce Code #include "esp_vfs_fat.h" #includ...

Are you commenting the Keys in your config client ? All I see is one line and is commented in the code you posted . This is how the config should be with mutual auth "which AWS uses" void update_firmware(char *lnk) { printf("\nFirmware Update Started !\n"); esp_http_client_config_t config = { .url =...

I haven't done this method in a while , I usually use an NVS partition for that But is there any chance you forgot to include the certificate in CmakeLists.txt in the main folder ? # Embed the server root certificate into the final binary # # (If this was a component, we would set COMPONENT_EMBED_TX...

I'm trying to run MQTT for logging together with espHttpClient doing multipart post upload for some reason this is not working at all I have the http working very well without any issue When I run MQTT, it connects to my mosquitto broker and subscribes , but the espHttpClient stops uploading the dat...

Thanks for the info on both ESPs & Linux

I really Appreciate your help

Every thing that is working on C / linux system , Is working on ESP Flash struct stat st ; char* filePath = "/sdcard/myFile.txt"; stat(filePath, &st); From here I can get all the usual info , Size , Name , Type of File .. except the st.st_ino It's always zero I even get a warning about the proper ty...

Hello I'm having hard time trying to get 8266-Rtos to do a directed UDP Broadcast (192.168.1.255) The example Server in the IDF does work but loses so many packets , This doesn't happen with 2 Android Phones using the same Subnet . Sending a Unicast packet to the chip works with almost 99% success ....

ADC works , actually it works like you expect it to work , but sometimes it just makes strange behaviour If you look at the link I posted earlier , it works but gives strange results from time to time and only by inverting the signal from HIGH to LOW or (pulling the PIN LOW) , it worked very accurat...

I'm getting the same thing you have , even when I pulled it low .. same result