So I am trying to use the flash encryption feature so that my firmware can not be extracted from the device. I am using the espressif extension built in vs code. Where enabled the flash encryption on boot. And selected Release mode. See image below flash encryption.png . However after I flash the de...

No IP is assigned now. I (10505) wifi:new:<1,1>, old:<1,1>, ap:<1,1>, sta:<255,255>, prof:1 I (10515) wifi:station: f8:5e:a0:df:e5:cb join, AID=1, bgn, 40U I (10515) web config: station f8:5e:a0:df:e5:cb join, AID=1 I (10515) web config: starting server W (10665) wifi:<ba-add>idx:4 (ifx:1, f8:5e:a0:...

It just does nothing. No ip is assigned. I (10505) wifi:new:<1,1>, old:<1,1>, ap:<1,1>, sta:<255,255>, prof:1 I (10515) wifi:station: f8:5e:a0:df:e5:cb join, AID=1, bgn, 40U I (10515) web config: station f8:5e:a0:df:e5:cb join, AID=1 I (10515) web config: starting server W (10665) wifi:<ba-add>idx:4...

@ESP_YJM your suggestion did stop the dchp however it is not setting a static IP

I am trying to perform a wifi scan to get the available wifi networks. Then switch to AP mode to host a web page from spiffs. However require the static IP address to be set. However this is not working. Followed the documentation on netif. Please assist this seems like it should be simple void WEBC...

I want to write data on the uart. Then data is received trigger an interrupt to fill buffer with incoming data. Don't want poll with uart read function. Is this possible. Note I am NOT using Freertos create tasks.

OK so if don't use the install of the driver can I set up the interrupt to receive. Do I need separate isr to manually write to the unit?

/** * Flushes any data in the FIFO buffer * * @param b - pointer to fifo_buffer_t structure * * @return none */ void FIFO_Flush( fifo_buffer_t * b) { unsigned head; /* used to avoid volatile decision */ if (b) { head = b->head; b->tail = head; } } /** * Adds a byte of data to the FIFO * * @param b ...

Hi, I have a fairly large project that has been working quite well. However I am currently struggling with UART ISR that is crashing my program. static void Initialize_Port(void) { setFlowControlLow(); if (boot) { uart_config_t uart_config = { .baud_rate = MODBUS_DEFAULT_BAUD, .data_bits = UART_DATA...

That's great to looking forward to seeing your course this month. What is the name of course when you release it on udemy?